Regulation The content listed below has been tagged with the topic "Regulation." Explore other topics to discover additional exciting content. Result Filters Title Type AudienceBasic pageBlockBook pageContactEventFacilityFleet: AircraftFleet: ShipFrequently Asked QuestionJobMedia: ArticleMedia: Article: Collection ParentMedia: DocumentMedia: ImageMedia: VideoSection HomeWebform Items per page 102550100 Changes to NDSSM effective 28 November 2018 November 28, 2018 Media: Document This document lists the changes to the NDSSM which became effective on November 28, 2018. OMAO Supplemental Policy to NOAA Small Boat Standards & Procedures Manual v.2 Media: Document OMAO Supplemental Policy to NOAA Small Boat Standards & Procedures Manual Changes to NDSSM effective 18 May 2018 May 18, 2018 Media: Document This document lists the changes to the NDSSM (signed on 4/5/17) which became effective on May 18, 2018. Changes to NDSSM Effective 24 October 2017 October 24, 2017 Media: Document This document lists the changes to the NDSSM (signed on 4/5/17) which became effective on October 24, 2017. Demand Valve and Oxygen First Stage Maintenance Policy December 15, 2017 Media: Document Maintenance policy for demand valves and oxygen first stages used by NOAA diving units. Changes to NDSSM - approved on 8/24/17 August 24, 2017 Media: Document Decision memorandum on changes to NOAA Diving Standards and Safety Manual subsequent to 05 April 2017. NOAA Diving Standards and Safety Manual (NDSSM) February 12, 2020 Media: Document The NOAA Diving Standards and Safety Manual (NDSSM) sets the minimum safety standards for diving under NOAA. Operating Standards for NOAA Hyperbaric Chambers Media: Document The following standards and procedures were established by the NOAA Diving Program to provide criteria, specifications, and requirements for operating NOAA hyperbaric chambers. OMAO 0110A: Marine Operations Safety and Environmental Statement Media: Document Marine Operations, in the Office of Marine and Aviation operations (OMAO), will develop, implement, maintain, and ensure continual improvement via safety and environmental management systems.